Using a clean, soft cloth or applicator, apply the prepared polishing paste evenly across the entire surface of the travertine table top. Work in small sections to ensure thorough coverage. The polishing paste contains abrasive particles that will help smooth out minor imperfections and restore the stone’s sheen.
How to sand a table by hand?
Sand the surface Use a coarse sandpaper and sand, by hand or with an orbital sander, the tabletop and legs. Remember to always sand in the direction of the wood grain. You may need to replace the sandpaper a few times if it becomes too worn. As you sand, intermittently brush the dust off the surface of the table.
How do you restore a polished table top?
Starting with the roughest sandpaper (60-grit), sand in the direction of the grain. You can sand by hand, but a mechanical sander makes the job go, ahem, much smoother. Finish by wiping down the table with a tack cloth so it’s free of dust, then sand the surface again, this time with your 120-grit, to polish the wood.
How to protect travertine table top?
You need to use the best travertine sealer that forms a protective waterproof layer on the surface, thereby preventing any such problems. A travertine countertop sealer forms a protective coating on the surface, which does not let the scratches form on the stone.
How do you polish a table top?
Polishing the surface You can use a soft cloth or a unique antique furniture polish to add shine to your tabletop. Make sure you only use a clean cloth to polish your tabletop, as any dirt or dust left on the cloth can scratch the finish. Applying too much pressure can also cause damage, so be sure to clean carefully.
How do you polish an acrylic table top?
Apply one or two squirts of Brillianize, then use your microfiber cloth to completely polish the surface before moving on to the next area. As the old saying goes, just put some elbow grease into it. You want to be sure you’ve polished all of the liquid away before continuing.
Our advice is to only buy specific air hockey table polishes and apply a very light, even coat. Once dry, give the table another wipe and polish the surface for a nice glossy finish.
How to care for travertine table top?
For daily cleaning, use a damp, non-abrasive cloth to wipe off travertine surfaces. Use only neutral soaps. Do not use scouring pads, acidic detergents, or abrasive cleaning products of any kind, as this may permanently scratch, stain, or damage the surface.
How to clean a travertine table top?
For daily cleaning, use a damp, non-abrasive cloth to wipe off travertine surfaces. Use only neutral soaps. Do not use scouring pads, acidic detergents, or abrasive cleaning products of any kind, as this may permanently scratch, stain, or damage the surface.
How to polish an antique marble table top?
Rinse the sponge or cloth again with hot water and wring it out thoroughly to remove most of the excess water. Wipe over the surface again to remove any residue. Dry immediately and polish with a chamois. Some museum decorative arts curators recommend using distilled water for the cleaning process.
How much space should be between table top and chandelier?
A minimum of seven feet from the floor is a good standard to follow. However, if hanging over a table, keep a minimum of 36 inches between tabletop and chandelier bottom to avoid hitting your head.”
How to care for a travertine table top?
Travertine has natural pitting that can collect debris; dust regularly or use a handheld vacuum, or a soft-bristled brush with water and mild soap. Avoid the use of harsh chemicals or abrasive cleaning materials. The use of a resealer, such as More™ Premium Stone Sealer, is recommended. Apply once a year or as needed.
How to move a heavy table top by yourself?
Moving Dolly: A dolly can help you transport heavy items as it allows you to roll furniture rather than lift it. Furniture Sliders: Placing sliders under the legs or corners of heavy pieces can significantly reduce friction, allowing items to slide.
How to polish a stone table top?
Using a polishing powder (a.k.a. polishing compound), removes minor scratches and stains from the surface of the stone. This restores the luster of the surface and reduces the dull appearance that can result from years of normal wear and tear that comes from day-to-day use.
How high should a chandelier be from table top?
Interior design guidelines recommend hanging your chandelier between 30 and 36 inches over the table surface in a room with a ceiling height of eight feet. You can add three more inches per foot for higher or vaulted ceilings.
The use of a resealer, such as More™ Premium Stone Sealer, is recommended. Apply once a year or as needed.
